• Rated up to 300 Nm
• Dia 22, 32, 42, 52, 62, 72, 81, 105 and 120 mm
• Ratios 3.7 to 2076:1
• Input speeds up to 6000 r/min

General Purpose Planetary Gearheads can be used with virtually any motor and offer cost effective torque enhancement and speed reduction. Metal or thermoplastic construction or a combination of both ensure optimization of strength, cost, noise and life. Tailor-made, not just off the shelf, there are an incredible 10000 different combinations.
Complete geared motor solutions to suit requirements can also be provided.

Delivery:  3/4 working weeks from receipt of order, for standard items only

Downloads:

Product Catalogue  Product Installation/Maintenance

• Rated up to 195 Nm
• Dia 32, 42, 52, 62, 72, 81 and 105 mm
• Ratios 3.65 to 2653:1
• Input speeds up to 3000 r/min

Increasing demand for quiet drives has lead to the introduction of the Low Noise Planetary Gearhead range. Gear design and materials combine to provide significantly quieter solutions without compromising torque handling capability. Noise sensitive applications, typically found in markets for domestic, medical and surveillance products are expected to benefit from this new range.
Complete geared motor solutions to suit requirements can also be provided. 

Delivery:  3/4 working weeks from receipt of order, for standard items only

Downloads:

Product Catalogue  Product Installation/Maintenance

• Rated up to 3000 Nm
• Backlash down to 2'
• Max motor shaft dia 60 mm
• Integer ratio from 3 to 100:1
• Input speeds up to 10000 r/min
• Co-axial input and output arrangement
• Same input and output direction
• Motor connection via coupling with clamping hub

Precision Planetary Gearheads are used in machine tools, robots and a wide range of automation engineering applications. Greased for life, they are maintenance-free and can be mounted in any attitude.
2D and 3D CAD Drawings available.

Delivery:  5/6 working weeks from receipt of order, for standard items only

• Rated up to 400 Nm
• Backlash down to 10'
• Max motor shaft dia 32 mm
• Integer ratios from 3 to 1000:1
• Input speeds up to 6000 r/min
• Co-axial input and output arrangement
• Same input and output direction
• Motor connection via coupling with clamping hub

The Economy Planetary Gearhead series has been developed for applications where backlash is less critical. Greased for life, they are maintenance-free and can be mounted in any attitude.
2D and 3D CAD Drawings available.

Delivery:  4/5 working weeks from receipt of order, for standard items only

• Rated up to 7833 Nm
• Backlash down to 1'
• Integer ratios from 5.2 to 90:1
• Input speeds up to 6000 r/min
• Keyless connection
• Available in hollow shaft, dual output shaft  and single output shaft configurations

The Worm Precision Gearhead series has been designed to meet the demands of servo drive applications, e.g. high accuracy tasks in manufacturing machine and assembly control systems. The single stage right-angled configuration allows for a compact design unit. Three levels of backlash precision are available. Greased for life, the gearboxes are maintenance-free.
2D and 3D CAD Drawintgs are available, please just ask.

Delivery:  6/7 working weeks from receipt of order, for standard items only

Downloads:

Product Catalogue  Product Installation/Maintenance

• Torsional backlash from <15' to <30'
• 1st and 2nd gear ratios of 3.17, 4:1 and 5.5:1
• Inline bevel design
• Faster downshifting operation
• Superior low speed performance
• Low vibration and minimal heat transfer to spindle

The Duoplan Two-Speed Gear Drives remove the need for larger and more costly spindle motors and controls in machine tool main spindle drives. Optimising the power of main spindle drives below their normal constant power range is a simple, fast and efficient matter of downshifting.

Downloads:

Product Catalogue

• Rated up to 1440 Nm
• Backlash down to 2'
• Max motor shaft dia 80 mm
• Integer ratios from 3 to 15:1
• Input speeds up to 8000 r/min
• Motor connection via coupling with clamping hub

The DynaGear Precision Gearhead series has been designed for highly dynamic servo drives. The newly developed hybrid gearing allows for high transmission ratios. A reduced torsional backlash and a high positional accuracy are achieved through optimized manufacturing techniques. Greased for life, the gearboxes are maintenance-free and can be mounted in any attidue. Also High Ratio options (2-stage) from 18 to 100:1, please enquire.

Delivery:  4/5 working weeks from receipt of order

Downloads:

Product Catalogue (under construction)  Product Installation/Maintenance   CAD Files

• Rated up to 140 Nm
• Backlash down to 6'
• Max motor shaft dia 24 mm
• Integer ratios from 5 to 15:1
• Input speeds up to 4200 r/min
• Motor connection via coupling with clamping hub

The new compact Economy Right-Angled Gearheads have been designed for users looking for high levels of performance and flexibility from smaller, more cost effective units. The one-piece aluminium body offers a compact lightweight design whilst large, high quality taper roller bearings make it suitable for applications with high axial and radial loads.

Downloads:

Product Catalogue (under construction)  Product Installation/Maintenance   CAD Files

• Rated up to 7000 Nm
• Ratios from 1:1 up to 5:1
• Output via solid and hollow shaft
• Efficiency >98%
• Input speeds up to 6500 r/min
• Motor connection direct or via coupling and flange

The PowerGear offers angular torque transfer and torque distribution in single, or multiple shaft configuration for lifting arrays or transfer lines; when weight is important in non-stationary applications the PowerGear design is the ideal solution.
The PowerGear is often found in applications where torque forces are high and space is of a premium due to its' robust, reliable and maintenance free nature.

Delivery:  7/9 working weeks from receipt of order, for standard items only

Downloads:

Product Catalogue  Product Installation/Maintenance   CAD Files